How Do You Splice Video Camera Cable?

Video camera cables are an essential component of any video production setup. These cables transmit audio and video signals from the camera to the recording device, such as a computer or an external recorder.

However, sometimes the cable may become damaged or too short for your needs. In such cases, splicing a video camera cable can be a useful solution.

Splicing a video camera cable involves joining two or more cables together to create a longer cable or to replace a damaged section of the original cable. Here is how you can splice a video camera cable:

What You Will Need

To splice a video camera cable, you will need the following items:

  • A pair of wire cutters/strippers
  • A soldering iron
  • Soldering wire
  • Heat shrink tubing
  • Electrical tape
  • Extra video camera cables (if splicing to create a longer cable)

The Splicing Process

Here are the steps to follow when splicing your video camera cable:

Step 1: Cut the Cables to Length

Using your wire cutters/strippers, cut both ends of the cables you want to splice. Cut them at an angle so that there is more surface area for soldering.

Step 2: Strip the Insulation off Both Ends of Each Cable

Strip about half an inch of insulation from each end of both cables using your wire strippers.

Step 3: Twist Together the Exposed Wires from Both Cables

Twist together each exposed wire from both cables that you want to splice. Make sure that each wire is tightly twisted together.

Step 4: Solder the Twisted Wires Together

Using your soldering iron and soldering wire, apply heat to the twisted wires until the solder melts. This will join the wires together. Make sure that you do not overheat or burn the wires.

Step 5: Cover the Soldered Wires with Heat Shrink Tubing

Once you have finished soldering, slide a piece of heat shrink tubing over each splice. Heat each piece of tubing with a heat gun or lighter until it shrinks and covers the entire splice.

Step 6: Wrap Electrical Tape Around Each Heat Shrink Tubing

Wrap electrical tape around each piece of heat shrink tubing to provide extra protection and durability.


Splicing a video camera cable is not a difficult task but requires some basic tools and skills. By following these steps, you can splice video camera cables quickly and efficiently.

Remember to always be careful when working with electrical components and to take safety precautions such as wearing safety glasses and avoiding flammable materials. With practice, you can become proficient at splicing video camera cables, saving money on costly replacements or avoiding downtime due to damaged cables.